SOME SIGNS SHOULDN’T BE VINYL. HAND-PAINTED WORK LOOKS RIGHT WHERE PLASTIC NEVER WILL.
Hand-painted and specialty painted signage for Central Coast businesses – brick walls, heritage frontages, timber and murals, done with proper masonry-grade paint that weathers instead of peeling. Send us photos of the surface and we’ll tell you honestly whether paint or panel is the better call.
Design – Surface Preparation – Hand Painting – Clear Coating
Wall Murals – Heritage Signage – Painted Lettering – Rendered & Brick Surfaces
Central Coast Locals
Painted Signage Done the Traditional Way
Some surfaces simply reject vinyl. Rough brick, textured render, old timber and heritage frontages have no flat plane for film to grip, so anything applied lifts within a season. Paint follows the surface instead of fighting it, and on the right wall it will outlast the vinyl version several times over.
Before a brush is picked up we assess the substrate – porosity, existing coatings, moisture, sun exposure and whether the wall needs sealing first. Then we choose the system: primer, masonry or enamel colour coats, and a UV clear where the exposure demands it.
Wall Murals
Heritage Signage
Painted Lettering
Rendered & Brick Surfaces
Wall Murals
Heritage Signage
Painted Lettering
Rendered & Brick Surfaces
Central Coast Locals
The Wrong Finish on the Right Wall Wastes Both
Plenty of great walls get ruined by the quick option. Vinyl stuck to textured brick starts lifting at the top edge within months, traps water behind it, and eventually comes off in strips with dirt lines baked underneath. It looks worse than the bare wall it replaced.
Bad paintwork ages just as badly. Cheap paint over an unsealed, unprimed surface chalks and fades unevenly, and hand lettering done without proper layout looks amateur from the first day and never improves. On a heritage frontage that’s not just a bad sign – it can be a permanent mark on a building people notice.
Every painted job we take on has to be:
- Surface-appropriate: Paint used where it genuinely outperforms vinyl, and we’ll say so when it doesn’t.
- Properly prepared: Cleaned, sealed and primed so the coating bonds to the substrate.
- Weather-rated: Exterior-grade systems with UV-stable pigments and a protective clear where needed.
- Set out properly: Layout and letterforms drawn and measured on the wall before any colour goes down.
What painted signage communicates
- Character: Paint reads as craft, not print.
- Permanence: It’s part of the building, not stuck to it.
- Authenticity: On older buildings it looks like it belongs, because it does.
- Craft: Visible skill implies a business that values it.
WHAT MAKES BESPOKE DIFFERENT
There’s a reason the old painted wall signs on brick buildings still stop people, decades after the business closed. They were made for that wall by someone standing on it. Nothing printed and applied has ever quite carried the same weight.
You can’t fake it either – a vinyl panel bolted to a beautiful brick facade always looks like something covering the building instead of something belonging to it. If you’ve got a wall worth painting, painting it is the answer.
The Central Coast Difference
ANYONE CAN ROLL PAINT ON A WALL. SETTING OUT LETTERING IS ANOTHER THING ENTIRELY.
Painted signage is unforgiving. There’s no re-print, no peel-and-reposition. Layout, spacing and letterform have to be right on the wall before the first coat, and the coating system has to suit the substrate or it fails regardless of how good the lettering is.
HONEST MATERIAL ADVICE
We’ll tell you when paint is the wrong answer and a panel will serve you better.
SUBSTRATE PREPARATION
Cleaned, sealed and primed to suit brick, render or timber.
CORRECT COATING SYSTEM
Exterior-grade, UV-stable, with clear protection where exposure warrants.
SET OUT BY HAND, MEASURED PROPERLY
Layout snapped and checked on the wall before colour goes down.
CLEAR QUOTE DIRECTION
Layout snapped and checked on the wall before colour goes down.
LOCAL CENTRAL COAST EXPERIENCE
Woy Woy to Wyong, we know what salt and sun do to exterior coatings here.
Your Painted Sign in 3 Simple Steps, Reviews and Services
Mural, painted lettering, or heritage restoration? Not sure whether your wall needs sealing, or whether scaffold or a lift is required? Send photos of the wall from a distance and up close, plus rough dimensions.
Step 1
Wall Review & Quote Direction
We assess the surface and access, confirm paint is the right call, and give you costs plus current availability.
Step 2
Design & Approval
You’ll see the artwork mocked up on the wall photo. Heritage overlays or council requirements get flagged early, as those approvals run on their own timeline.
Step 3
Preparation & Painting
We prep, prime and paint on site. Weather dependent – most walls take 2-4 days, and it’s worth booking a stretch of settled weather rather than squeezing it in.
See What Our Customers Are Saying
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. 
Trustindex verifies that the original source of the review is Google. 
WORK GALLERY
Explore Recent Work
FAQ’s
Frequently Asked Questions
We produce a wide range of signage including shopfront signs, LED signage, fabricated letters, window graphics, vehicle wraps and general business signage.
Yes. We can assist with the design side, refinements to existing artwork and the full production and installation process.
Absolutely. If your current signage needs a refresh, relight, reface or full replacement, we can help assess the best option.
Absolutely. Vehicle wraps and graphics are a great way to carry your branding across your fleet or daily work vehicles.
Yes. LED signage and illuminated branding can be supplied depending on the project requirements.
Illuminated signs require electrical work, which can add a day. If council approval is needed, that
process can add additional time before we can install. we’ll factor this into your timeline from the
start.
Not anytime soon if its done right. We use commercial-grade panels, UV-resistant Perspex, and vinyl rated for 5–7 years outdoor use. Cheap signs fade quicker because of
cheap materials and poor preparation, we don’t take those shortcuts.
No problem. We offer design consultation and
can create signage that builds or matches your brand. Most clients just show us examples they
like and their existing brand colours, we create mockups from there.
Yes. We can match Pantone colours,
existing signage, and brand guidelines precisely. We’ll show you material samples and mockups
so you know exactly what you’re getting before anything is made.
We’re based on the Central Coast and primarily service Gosford, Erina, Tuggerah, Wyong, Terrigal, Berkeley Vale, Warnervale, The
Entrance, Lake Haven, and surrounding areas. For larger commercial projects, we can travel to
Newcastle, Sydney or even further, just ask.
All quotes include: design consultation, design mockups, council
approval assistance (if needed), premium materials (ACM/Perspex/LED), professional
installation, electrical work for illuminated signs, and 12-month workmanship warranty. No
hidden fees.
With premium materials and proper installation, your shopfront
sign should last 7–10+ years. ACM panels last 10+ years. LED modules last 50,000+ hours
(5–7 years of daily use). UV-resistant vinyl lasts 5–7 years. Cheap signs fail in 12–24 months.
Get in Touch
We’d love to hear from you
Email Us
MARK@BESPOKE-SIGNS.COM.AU
Phone
Call us
0484 597 703
Areas We Service
Gosford
Tuggerah
Wyong
Erina
