Boat Wraps & Marine Graphics for the Central Coast
Custom vinyl wraps, hull graphics, boat names and registration decals — printed on marine-grade cast film and fitted to handle saltwater, UV and regular wash-downs.
Design – Print – Fitting
Full Hull Wraps – Partial Graphics – Boat Names – Registration Decals – Jet Skis
Central Coast Locals
What a Boat Wrap Involves
A boat wrap is printed vinyl applied over the existing gelcoat or paint, covering as much or as little of the hull as you choose. Options range from a set of name decals and registration numbers through to partial accent graphics and full-hull colour changes.
Because the film sits over the original finish rather than replacing it, wrapping is reversible. The gelcoat underneath stays protected from UV while the wrap is on, and the film can be removed later without permanent alteration.
Full Hull Wraps
Partial Graphics
Boat Names
Registration Decals
Jet Skis
Full Hull Wraps
Partial Graphics
Boat Names
Registration Decals
Jet Skis
Marine Applications
Materials Used on Marine Applications
Marine work uses cast vinyl with a matched over-laminate. Cast film conforms to compound curves without shrinking back, which matters on hulls where the surface changes shape constantly.
The over-laminate is the layer doing the protective work. It shields the printed ink from UV, resists abrasion from fenders and dock contact, and makes the surface easier to clean.
Cast Vinyl
Conforms to hull curves and stays dimensionally stable.
Marine-Grade Adhesive
Formulated for constant moisture exposure.
UV Over-Laminate
Protects print from sun fade and salt exposure.
Removable
Comes away cleanly at end of life without damaging gelcoat.
Preparation and Care
Preparation determines how long the wrap lasts. The hull is washed, degreased and decontaminated before any film is applied, because salt residue and wax both prevent proper adhesion.
After fitting, the wrap needs a short curing period before the boat goes back in the water. Ongoing care is straightforward.
- Wash with mild detergent and a soft brush, avoiding abrasive compounds.
- Rinse salt off after each outing to prevent build-up along edges.
- Keep high-pressure washers away from film edges and seams.
- Avoid solvent-based cleaners and petroleum products on the vinyl.
- Antifoul and below-waterline areas are not wrapped and are handled separately.
Common Applications
Where a Boat Wrap Gets Used
From a simple set of name decals through to a full colour change, marine wraps cover a wide range of jobs. Most start with one of the following.
BOAT NAMES & HAILING PORTS
Traditionally the most requested job, usually cut vinyl lettering on the transom.
REGISTRATION NUMBERS
Required on the hull and produced to the size and format your state specifies.
ACCENT & PARTIAL GRAPHICS
Stripes, flashes and branded sections that lift the look without the cost of a full wrap.
FULL HULL COLOUR CHANGE
Complete coverage above the waterline, often used to update an older boat or match a livery.
COMMERCIAL & CHARTER BRANDING
Business name, contact details and licence information applied so it reads clearly from the water and the dock.
JET SKIS & TENDERS
Smaller craft take the same materials and process.
Process, Timeframes & Getting a Quote
Send photos of the boat from both sides plus the transom, the make and length, and what you have in mind. We’ll come back with options and pricing.
Step 1
Review & Quote
We assess the hull surface, size and coverage required, and provide costs and options.
Step 2
Design & Approval
Artwork is laid over photos of your boat so you can see placement before print.
Step 3
Fitting
Boat is delivered to us or wrapped on the trailer. Name and rego decals are usually same-day; partial graphics one day; full hull wraps 2–4 days depending on size.
See What Our Customers Are Saying
WORK GALLERY
Explore Recent Work
FAQ’s
Frequently Asked Questions
We produce a wide range of signage including shopfront signs, LED signage, fabricated letters, window graphics, vehicle wraps and general business signage.
Yes. We can assist with the design side, refinements to existing artwork and the full production and installation process.
Absolutely. If your current signage needs a refresh, relight, reface or full replacement, we can help assess the best option.
Absolutely. Vehicle wraps and graphics are a great way to carry your branding across your fleet or daily work vehicles.
Yes. LED signage and illuminated branding can be supplied depending on the project requirements.
Illuminated signs require electrical work, which can add a day. If council approval is needed, that
process can add additional time before we can install. we’ll factor this into your timeline from the
start.
Not anytime soon if its done right. We use commercial-grade panels, UV-resistant Perspex, and vinyl rated for 5–7 years outdoor use. Cheap signs fade quicker because of
cheap materials and poor preparation, we don’t take those shortcuts.
No problem. We offer design consultation and
can create signage that builds or matches your brand. Most clients just show us examples they
like and their existing brand colours, we create mockups from there.
Yes. We can match Pantone colours,
existing signage, and brand guidelines precisely. We’ll show you material samples and mockups
so you know exactly what you’re getting before anything is made.
We’re based on the Central Coast and primarily service Gosford, Erina, Tuggerah, Wyong, Terrigal, Berkeley Vale, Warnervale, The
Entrance, Lake Haven, and surrounding areas. For larger commercial projects, we can travel to
Newcastle, Sydney or even further, just ask.
All quotes include: design consultation, design mockups, council
approval assistance (if needed), premium materials (ACM/Perspex/LED), professional
installation, electrical work for illuminated signs, and 12-month workmanship warranty. No
hidden fees.
With premium materials and proper installation, your shopfront
sign should last 7–10+ years. ACM panels last 10+ years. LED modules last 50,000+ hours
(5–7 years of daily use). UV-resistant vinyl lasts 5–7 years. Cheap signs fail in 12–24 months.
Yes, wraps offer excellent protection against common environmental factors like UV exposure, minor abrasions, and road debris, helping preserve your car’s original condition.
Yes, partial wraps are available, allowing you to customise specific vehicle areas, such as the roof, hood, mirrors, or accent details.
Typically, car wraps for colour change takes between 2-5 days. We’ll provide an accurate timeline during your initial consultation.
Pricing varies based on vehicle size, wrap type, and complexity. Contact us directly for a detailed, personalised quote tailored to your vehicle and design preferences.
Virtually unlimited! We offer an extensive range of colours, finishes, and textures—from matte and gloss to chrome and carbon fibre options.
Regular gentle hand washing with mild soap is recommended. Avoid automated car washes and harsh chemicals to maintain the wrap’s longevity and appearance.
Absolutely! One major benefit of car wraps is their removability. Our professional team can remove the wrap safely, restoring your vehicle to its original paint.
No, professionally installed car wraps actually protect your original paint from minor scratches, UV rays, and everyday wear and tear.
High-quality wraps typically last between 5-7 years, depending on care, environmental conditions, and the quality of installation.
A colour change car wrap involves applying a vinyl film to your vehicle to change its appearance. It’s a popular alternative to traditional painting, allowing greater customisation and flexibility.
Get in Touch
We’d love to hear from you
Email Us
MARK@BESPOKE-SIGNS.COM.AU
Phone
Call us
0484 597 703
Areas We Service
Gosford
Tuggerah
Wyong
Erina
