Every Day Your Work Vehicle Drives Around Unbranded Is Free Advertising You’re Throwing Away
Full and partial vehicle wraps for Central Coast trades and businesses — designed to be read at a red light, printed on warranted cast film, and fitted properly around every curve, recess and panel gap. Send us photos of both sides of the vehicle and the make and model, and we’ll come back with options and a ballpark figure.
Design – Print – Fitting
Full Wraps – Partial Wraps – Fleet Livery – Cut Vinyl Lettering
Central Coast Locals
Vehicle Wraps That Still Look Sharp in Year Three
A wrap lives a harder life than any sign you own. It gets washed, parked in full sun, splashed with salt off the M1 and rubbed by every branch on every job site driveway. The difference between a wrap that still looks new in three years and one that’s peeling at the edges by next winter is almost entirely down to the film chosen and how it was fitted.
We work through the whole vehicle before printing: which panels are worth covering, where the design has to break across gaps, how deep the recesses are, what comes off and goes back on, and how the film will behave on that specific curve. Lifting edges, cracked seams over bumper contours and print that fades unevenly are all avoidable with the right film and preparation.
Full Wraps
Fleet Livery
Partial Wraps
Full Wraps
Fleet Livery
Partial Wraps
Central Coast Locals
A Blank Ute Is the Most Expensive Vehicle You Own
Your vehicle already sits in traffic, parks in driveways and gets seen thousands of times a week. Unbranded, none of that counts. Every hour it’s on the road is exposure you’ve already paid for and chosen not to collect.
Then there’s the wrap that gets done badly, which is worse than none at all. A phone number too small to read from the next lane. A logo blown up from a low-res file so it’s soft at two metres. Edges lifting after the first proper wash. A parked ute with peeling graphics is a live advertisement for cutting corners, and it’s sitting outside a customer’s house.
Every wrap we produce has to be:
- Readable in traffic: Contact details sized for the car behind you, not for the proof on screen.
- Cast film, warranted: Quality cast vinyl and laminate rated for Australian UV, not cheap calendered stock that shrinks.
- Fitted around the vehicle: Handles, mirrors and trim removed where needed, film worked properly into recesses.
- Removable cleanly: Lifts off at end of life without ghosting or paint damage, which protects resale.
What a Sharp Wrap Tells People
- Legitimate: A branded vehicle reads as an actual business, not a bloke with a ute.
- Trusted: Homeowners are more comfortable letting a marked vehicle into the driveway.
- Established: Consistent fleet livery makes two vehicles look like ten.
- Quality: Neat work on the vehicle implies neat work on the job.
WHAT MAKES BESPOKE DIFFERENT
Next time you’re stopped at lights, count how many work vehicles are around you and how many you could actually name. The plain white ones you’ll forget before the light goes green. The one you remember is the one where the name was big, the trade was obvious in a glance, and the number was readable from where you sat.
That’s the whole job. Not a pretty design that works at A4, but something a stranger can absorb in the four seconds they’re behind you. So we design it at driving distance first and check it looks good up close second.
The Central Coast Difference
ANYONE CAN STICK VINYL ON A UTE. FITTING IT PROPERLY IS THE TRADE.
A wrap is a manufacturing job, not a sticker job. Design, colour management, print, lamination, panel preparation, trim removal, heat forming and post-heating all determine whether it lasts. Most wrap failures trace back to something skipped in the first hour, not something that happened in year two.
We control every stage in-house, which is why our wraps sit flat, hold colour and come off cleanly when it’s time.
DESIGN FOR DISTANCE
Layout and letter sizing worked out for how the vehicle is actually seen, on the move.
WARRANTED MATERIALS
Cast film with matched over-laminate for UV and abrasion, not the cheapest roll available.
PROPER PREPARATION
Deep clean, degrease and trim removal so the film bonds to paint, not to road grime.
PRINT & FIT UNDER ONE ROOF
We print and fit our own work, so colour, tiling and panel breaks are planned together.
CLEAR QUOTE DIRECTION
Design, print, fitting and any removal of old graphics quoted up front.
LOCAL EXPERIENCE
Woy Woy to Wyong, we know what coastal sun and salt do to vehicle graphics.
Your New Sign in 3 Simple Steps
Full wrap, partial, or just cut lettering and a logo? Not sure what your budget realistically covers? Send photos of both sides and the rear, the make, model and year, and any logo files you have, and we’ll go through it on a quick call.
Step 1
Vehicle Review & Quote Direction
We check the panels, curves and existing paint condition, recommend a coverage level to suit the budget, and give you costs plus current booking availability.
Step 2
DESIGN & APPROVAL
You’ll see the design laid over your actual vehicle template so there are no surprises about where the logo lands on a door gap. Changes get made before anything goes to print.
Step 3
Print & Fitting
We print, laminate and fit in-house. Most single-vehicle wraps need the vehicle with us for 1–3 days depending on coverage — worth booking ahead around your quiet week.
See What Our Customers Are Saying
WORK GALLERY
Explore Recent Work
FAQ’s
Frequently Asked Questions
We produce a wide range of signage including shopfront signs, LED signage, fabricated letters, window graphics, vehicle wraps and general business signage.
Yes. We can assist with the design side, refinements to existing artwork and the full production and installation process.
Absolutely. If your current signage needs a refresh, relight, reface or full replacement, we can help assess the best option.
Absolutely. Vehicle wraps and graphics are a great way to carry your branding across your fleet or daily work vehicles.
Yes. LED signage and illuminated branding can be supplied depending on the project requirements.
Illuminated signs require electrical work, which can add a day. If council approval is needed, that
process can add additional time before we can install. we’ll factor this into your timeline from the
start.
Not anytime soon if its done right. We use commercial-grade panels, UV-resistant Perspex, and vinyl rated for 5–7 years outdoor use. Cheap signs fade quicker because of
cheap materials and poor preparation, we don’t take those shortcuts.
No problem. We offer design consultation and
can create signage that builds or matches your brand. Most clients just show us examples they
like and their existing brand colours, we create mockups from there.
Yes. We can match Pantone colours,
existing signage, and brand guidelines precisely. We’ll show you material samples and mockups
so you know exactly what you’re getting before anything is made.
We’re based on the Central Coast and primarily service Gosford, Erina, Tuggerah, Wyong, Terrigal, Berkeley Vale, Warnervale, The
Entrance, Lake Haven, and surrounding areas. For larger commercial projects, we can travel to
Newcastle, Sydney or even further, just ask.
All quotes include: design consultation, design mockups, council
approval assistance (if needed), premium materials (ACM/Perspex/LED), professional
installation, electrical work for illuminated signs, and 12-month workmanship warranty. No
hidden fees.
With premium materials and proper installation, your shopfront
sign should last 7–10+ years. ACM panels last 10+ years. LED modules last 50,000+ hours
(5–7 years of daily use). UV-resistant vinyl lasts 5–7 years. Cheap signs fail in 12–24 months.
Get in Touch
We’d love to hear from you
Email Us
MARK@BESPOKE-SIGNS.COM.AU
Phone
Call us
0484 597 703
Areas We Service
Gosford
Tuggerah
Wyong
Erina
