YOUR CUSTOMERS SPEND TWENTY MINUTES STARING AT A BLANK WALL. MAKE IT WORK FOR YOU.
Printed wall graphics and commercial wallpaper for Central Coast businesses – full-colour, wipeable, seam-matched and installed without bubbles or lifting corners. Send us photos of the wall and rough dimensions and we’ll come back with material options and a ballpark figure.
Design – Print – Installation
Feature Walls – Full Wall Murals – Reception Branding – Frosted & Textured Finishes
Central Coast Locals
Interior Graphics That Suit the Room and the Traffic
Wall graphics fail for boring reasons: the wrong substrate for the surface, seams that don’t line up, or a finish that can’t handle being wiped down in a busy space. A gym wall, a cafe, a medical waiting room and a warehouse office all need different material, and picking one for all of them is how you end up with peeling corners in six months.
We assess the wall before anything is printed – surface texture, paint condition and age, moisture, light hitting the wall, and how much physical contact it’ll get. Then we match the substrate and finish to it, and plan seam placement so joins land where the eye doesn’t go.
Feature Walls
Full Wall Murals
Reception Branding
Frosted & Textured Finishes
Feature Walls
Full Wall Murals
Reception Branding
Frosted & Textured Finishes
Central Coast Locals
The Space Says Something About You Whether You Chose It or Not
A customer waiting inside your business has nothing to do but look around. Bare walls, scuffed paint and a printed A4 sign stuck up with tape all register, even if nobody consciously notices. That’s a long, quiet impression forming while they wait, and you’re not controlling any of it.
Cutting corners here shows up fast. Consumer-grade paper that can’t be cleaned starts marking within weeks. Seams that don’t align turn a feature wall into an obvious patch job. Film applied to fresh or flaking paint pulls away, sometimes taking the paint with it, and now you’re paying a painter as well.
Every install we do has to be:
- Fit for the room: Substrate matched to traffic, moisture and how often it’ll be cleaned.
- Seam-managed: Panels planned and aligned so joins are hard to find.
- Surface-tested: Wall condition checked first so the graphic bonds and comes off cleanly later.
- Print-quality: Files scaled and prepared for viewing from arm’s length, where every flaw shows.
What a considered interior communicates
- Invested: You spent money on the space, so you’re not going anywhere.
- Branded: The look outside carries all the way through.
- Cared for: A finished interior suggests a business that finishes things.
- Premium: Fit-out quality sets the price expectation before anyone asks.
WHAT MAKES BESPOKE DIFFERENT
Think about the last waiting room you sat in that felt cheap. You probably couldn’t say why. It was likely nothing dramatic – just tired walls, mismatched signage and a space nobody had bothered with. That feeling attaches itself to the business, and it’s still there when they hand you the invoice.
The opposite is just as automatic. Walk into a space that’s been finished properly and you assume competence before a word is spoken. Interior graphics are one of the cheapest ways to buy that assumption.
The Central Coast Difference
Anyone Can Hang Wallpaper. Getting It Flat and Keeping It There Is the Skill.
Wall graphics look simple until you’re on site with a wall that isn’t square, paint that’s twelve years old, and a mural that has to line up across four panels. Surface prep, substrate choice, panel sequencing and edge treatment are what separate a wall that still looks perfect in year three from one that’s curling at the top corner by Christmas.
RIGHT MATERIAL FOR THE ROOM
Commercial-grade, wipeable substrates chosen for the actual environment.
SURFACE PREPARATION
Walls cleaned, tested and made good so the graphic adheres properly.
SEAM PLANNING
Panel layout worked out around the artwork, not the other way around.
PRINT AND INSTALL IN-HOUSE
Same team prints and hangs it, so colour matches across panels.
CLEAR QUOTE DIRECTION
Design, print, install and any wall prep costed before you commit.
LOCAL CENTRAL COAST EXPERIENCE
Woy Woy to Wyong, we know how coastal humidity affects interior adhesion.
Your Feature Wall in 3 Simple Steps, Reviews and Services
Full mural, branded feature wall, or frosted film on internal glass? Not sure whether your wall surface will even take it? Send photos of the space, rough dimensions and any brand files.
Step 1
Space Review & Quote Direction
We look at the wall, surface and lighting, recommend the material, and give you costs and current install availability.
Step 2
Design & Approval
You’ll see the artwork rendered onto a photo of your actual wall at real scale, so you can judge it properly before print.
Step 3
Print & Installation
We print, then install with minimal disruption. Most single walls are done in a day, and we can work outside trading hours if the space can’t be closed.
See What Our Customers Are Saying
WORK GALLERY
Explore Recent Work
FAQ’s
Frequently Asked Questions
We produce a wide range of signage including shopfront signs, LED signage, fabricated letters, window graphics, vehicle wraps and general business signage.
Yes. We can assist with the design side, refinements to existing artwork and the full production and installation process.
Absolutely. If your current signage needs a refresh, relight, reface or full replacement, we can help assess the best option.
Absolutely. Vehicle wraps and graphics are a great way to carry your branding across your fleet or daily work vehicles.
Yes. LED signage and illuminated branding can be supplied depending on the project requirements.
Illuminated signs require electrical work, which can add a day. If council approval is needed, that
process can add additional time before we can install. we’ll factor this into your timeline from the
start.
Not anytime soon if its done right. We use commercial-grade panels, UV-resistant Perspex, and vinyl rated for 5–7 years outdoor use. Cheap signs fade quicker because of
cheap materials and poor preparation, we don’t take those shortcuts.
No problem. We offer design consultation and
can create signage that builds or matches your brand. Most clients just show us examples they
like and their existing brand colours, we create mockups from there.
Yes. We can match Pantone colours,
existing signage, and brand guidelines precisely. We’ll show you material samples and mockups
so you know exactly what you’re getting before anything is made.
We’re based on the Central Coast and primarily service Gosford, Erina, Tuggerah, Wyong, Terrigal, Berkeley Vale, Warnervale, The
Entrance, Lake Haven, and surrounding areas. For larger commercial projects, we can travel to
Newcastle, Sydney or even further, just ask.
All quotes include: design consultation, design mockups, council
approval assistance (if needed), premium materials (ACM/Perspex/LED), professional
installation, electrical work for illuminated signs, and 12-month workmanship warranty. No
hidden fees.
With premium materials and proper installation, your shopfront
sign should last 7–10+ years. ACM panels last 10+ years. LED modules last 50,000+ hours
(5–7 years of daily use). UV-resistant vinyl lasts 5–7 years. Cheap signs fail in 12–24 months.
Yes, wraps offer excellent protection against common environmental factors like UV exposure, minor abrasions, and road debris, helping preserve your car’s original condition.
Yes, partial wraps are available, allowing you to customise specific vehicle areas, such as the roof, hood, mirrors, or accent details.
Typically, car wraps for colour change takes between 2-5 days. We’ll provide an accurate timeline during your initial consultation.
Pricing varies based on vehicle size, wrap type, and complexity. Contact us directly for a detailed, personalised quote tailored to your vehicle and design preferences.
Virtually unlimited! We offer an extensive range of colours, finishes, and textures—from matte and gloss to chrome and carbon fibre options.
Regular gentle hand washing with mild soap is recommended. Avoid automated car washes and harsh chemicals to maintain the wrap’s longevity and appearance.
Absolutely! One major benefit of car wraps is their removability. Our professional team can remove the wrap safely, restoring your vehicle to its original paint.
No, professionally installed car wraps actually protect your original paint from minor scratches, UV rays, and everyday wear and tear.
High-quality wraps typically last between 5-7 years, depending on care, environmental conditions, and the quality of installation.
A colour change car wrap involves applying a vinyl film to your vehicle to change its appearance. It’s a popular alternative to traditional painting, allowing greater customisation and flexibility.
No. It helps with everyday surface wear and spills within the selected product’s limits. It does not make stone unbreakable or replace chopping boards, trivets and proper care.
The protective principle is similar, but the product needs to be suitable for stone benchtops. Automotive film specifications and warranties should not be assumed to apply
We can assess it. The stone, finish and condition determine suitability, and existing damage may need restoration before film is applied.
Organise it before the benchtop goes into regular use. Contact us while the kitchen is being finished so we can plan installation once the stone and surrounding work are ready.
Many sound cupboard surfaces can be considered. Send photos of the finish, door profiles and any damage so we can assess preparation and film suitability.
It can be a cost-effective option when the layout and cabinetry are worth keeping. The saving depends on the number of surfaces, preparation and chosen film; a quote gives you a useful comparison.
Yes, on suitable surfaces such as wardrobes, internal doors, reception counters and interior panels. We assess the application and select the film accordingly.
No. A decorative architectural film changes the appearance of a surface. Clear benchtop protection film is a separate product selected to help protect suitable stone.
Yes, subject to the condition of the surface and existing coating. We also check whether the current layout still suits the site before repeating it.
We can discuss a revised layout and the treatment of old markings. Supply any approved plans and confirm site requirements before the new set-out is agreed.
It depends on the marking system and site conditions. We confirm the required drying or curing period for your job so you can plan access.
The amount and type of marking, surface preparation, old-line treatment, access and the number of visits required. Photos and a layout help us price the work accurately.
Get in Touch
We’d love to hear from you
Email Us
MARK@BESPOKE-SIGNS.COM.AU
Phone
Call us
0484 597 703
Areas We Service
Gosford
Tuggerah
Wyong
Erina
